VNETPERF OUTPUT INERPRETETION

SK21SK21 Vertica Customer

Please help me to understand why clockskew in vnetperf output is coming in negative between node 1 and node 2.

[dbadmin@verticadb-1 ~]$ /opt/vertica/bin/vnetperf --condense -hosts 10.65.34.102,10.65.34.104

The maximum recommended rtt latency is 2 milliseconds. The ideal rtt latency is 200 microseconds or less. It is recommended that clock skew be kept to under 1 second.

test | date | node | index | rtt latency (us) | clock skew (us)

latency | 2021-09-23_23:14:22,385 | 10.65.34.102 | 0 | 46 | 2
latency | 2021-09-23_23:14:22,385 | 10.65.34.104 | 1 | 53 | -1596

Whereas in other nodes/hosts its showing possitive
Output from node 3 and node 4
[dbadmin@verticadb-1 ~]$ /opt/vertica/bin/vnetperf --condense -hosts 10.65.34.105,10.65.34.106

The maximum recommended rtt latency is 2 milliseconds. The ideal rtt latency is 200 microseconds or less. It is recommended that clock skew be kept to under 1 second.

test | date | node | index | rtt latency (us) | clock skew (us)

latency | 2021-09-23_23:12:29,348 | 10.65.34.105 | 0 | 56 | 1835
latency | 2021-09-23_23:12:29,348 | 10.65.34.106 | 1 | 60 | 511

Answers

  • Jim_KnicelyJim_Knicely - Select Field - Administrator
    edited September 2021

    Clock skew between hosts is detected by taking the difference between the time of each node and the time at the start of the operation. For this reason, even the local node has clockskew. This skew (or "drift") should have a magnitude less than one second (1,000,000 us). Negative skew is just as bad as positive skew, just seen from the other side.

    Interesting read: https://en.wikipedia.org/wiki/Clock_skew

  • SK21SK21 Vertica Customer

    Thanks @JimKnicely for the explanation so here we can just ignore the skew as it is below 1 second any other ways to check network related problems as we had a network outage earlier and since then we gettting delayed reports from server connections and [vertica] [vjdbc] [100161] connection close errors in dbvisualizer.

  • Jim_KnicelyJim_Knicely - Select Field - Administrator

    Make sure you are Using Connection Keep-Alive in DbVisualizer!

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file