Options

install_vertica script not working

Osiris_1Osiris_1
in General Discussion
Hi,

I am trying to run the install_vertica script in the /opt/vertica/sbin directory, and I get the error below. Note, I am logged in as root. Should I preconfigure something before running the script?

./install_verticaVertica Analytic Database 7.0.1-0 Installation Tool


>> Validating options...

Upgrading admintools meta data format..
scanning /opt/vertica/config/users
Error: No machines will be included in the cluster!
Hint: provide --hosts.
Installation FAILED with errors.

Installation stopped before any changes were made.

Comments

  • Options
    R_McKeonR_McKeon
    Hello Osiris,

    What is the exact install_vertica command you are running?

    Thanks,
    Rory
  • Options
    [Deleted User][Deleted User] ✭
    As the message said you need to do

    install_vertica -s <ip/s or host/s name of the machine that you want to install vertica> -r <the location of the rpm>

    HTH
    Eugenia
  • Options
    Osiris_1Osiris_1
    the script I am running is (located in /opt/vertica/sbin)

     ./install_vertica

    I get the following output:

    Vertica Analytic Database 7.0.1-0 Installation Tool

    >> Validating options...

    Upgrading admintools meta data format..
    scanning /opt/vertica/config/users
    Error: No machines will be included in the cluster!
    Hint: provide --hosts.
    Installation FAILED with errors.

    Installation stopped before any changes were made.
  • Options
    R_McKeonR_McKeon
    Hello Osiris,

    The documented steps you'll need to take to install Vertica are located at:

    https://my.vertica.com/docs/7.0.x/HTML/index.htm#Authoring/InstallationGuide/InstallingVertica/RunTh...

    Thanks,
    Rory


  • Options
    RCaseyRCasey
    As stated above you need to supply the hosts as a parameter of the install command. The link to the install documentation is very accurate and will help you.
    RCasey
  • Options
    anmol_koulanmol_koul

    Osiris,

     

    if you want to setup a single node cluster, use your local loopback address as host address otherwise for a cluster supply address of the other nodes. Do refer the install guide for detailed info.

     

    -Anmol

  • Options
    R_McKeonR_McKeon
    Please note that if you use the loopback address (127.0.0.1), then you cannot add any additional nodes to form a cluster in the future.

    Thanks,
    Rory
  • Options
    Kenneth_DunnKenneth_Dunn
    Hi I cant find the install_vertica script or the directory "sbin" in /opt/vertica/
    This is after I have installed the HP Vertica package. Am I doing something wrong? Running version:7.0.1-0 on redhat linux 

  • Options
    RCaseyRCasey
    try looking in /opt/vertica/sbin.
  • Options
    Kenneth_DunnKenneth_Dunn
    don't have that directory either
  • Options
    [Deleted User][Deleted User]
    Hi Kenneth,

    Have you installed the Vertica RPM?  (Or .deb, on Debian/Ubuntu.)

    If not, try doing that before looking for install_vertica.  If so, make sure you're installing the correct package.  Also make sure that you don't have some configuration-management program (such as puppet, etc) that is deleting the package's files because it doesn't recognize them.

    Adam
  • Options
    digilbdigilb

    hi friends, Most of the errors fixed now. But i like to know how to fix
    verify-10.48.6.43.xml:
    _ HINT (S0305): https://my.vertica.com/docs/8.1.x/HTML/index.htm#cshid=S0305
    TZ is unset for mymarsdb. Consider updating .profile or .bashrc_
    I'm just confused where and how to fix this issue. Even after googling little bit confused. pls guide me

  • Options
    digilbdigilb
    edited October 2017

    My recent error's posted below. I bit confused with first one "HINT" and not getting proper picture to resolve it. Pls assist me.

    Validating node and cluster prerequisites...

    Prerequisites not fully met during local (OS) configuration for
    verify-10.48.6.43.xml:
    ** **_ HINT (S0305): https://my.vertica.com/docs/8.1.x/HTML/index.htm#cshid=S0305
    TZ is unset for mymarsdb. Consider updating .profile or .bashrc_****
    WARN (S0160): https://my.vertica.com/docs/8.1.x/HTML/index.htm#cshid=S0160
    These disks do not have 'ext3' or 'ext4' filesystems: '/dev/xvda1' =
    'xfs'
    WARN (N0010): https://my.vertica.com/docs/8.1.x/HTML/index.htm#cshid=N0010
    Linux iptables (firewall) has some non-trivial rules in tables: filter
    WARN (S0112): https://my.vertica.com/docs/8.1.x/HTML/index.htm#cshid=S0112
    vm.swappiness is higher than recommended: your 60 > 1

    System prerequisites failed. Threshold = WARN
    Hint: Fix above failures or use --failure-threshold

    Installation FAILED with errors.

    AdminTools and your existing Vertica databases may be unavailable.
    Investigate the above warnings/errors and re-run installation.

  • Options
    Jim_KnicelyJim_Knicely - Select Field - Administrator

    Did you visit the suggested doc site?

    https://my.vertica.com/docs/8.1.x/HTML/index.htm#cshid=S0305

    It let's you know how to fix your issue :smile: It's just a warning, but it's a good idea to set the TZ environment variable.

  • Options
    digilbdigilb

    yeah i visited but not getting proper picture to modify as per my need.. could you please let me know steps to be follow. from basic if possible

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Format
SpoilerCodeQuote
Heading 2Heading 1
Emoji
:):D:(;):/:o:s:p:'(:|B):#:*<3o:)>:)
Url
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file
Home • General DiscussionComment As ...